DESCALER
NEW
JET ANGLES Front: 1 @ 15˚ Side: 2 @ 100˚ Rear: 2 @ 170˚
WARTHOG X™ PIPE SIZE: 3-8" INLET: 3/8" & 1/2" NPT PRESSURE RATING: 1200-5000 psi FLOW RATE: 9-21 gpm SERVICE INTERVAL: 250 hours
DESCALER • One front jet for unplugging and two side jets angled to reduce stand-off distance to the pipe wall, delivering intense jet impact to remove tough build up, calcium deposits, and scaling with ease, resulting in a faster clean time • Jetting is configured with more force to the side jets for cleaning and polishing
² Two fixed low angle back jets for max thrust and flushing are standard on the body, with additional controlled rotary jets in the head configuration ² Access ports enable viscous fluid change without disassembly for easy field maintenance ² Minimum pressure loss through the tool, delivering more power to the nozzles for higher jet impact ² Engineered for long service intervals
DESCALING PULLING/ FLUSHING
STANDARD WHIP HOSE AVAILABLE FOR 1/2” INLET The whip hose reduces wear on the pressure hose.
Powered by FlippingBook